graphicsraka.blogg.se

• Engine idle shutdown timer driver#

Verify Operation: Start the truck and verify that the idle timer is functioning correctly at the desired time.įor the Idle Shutdown to operate, the coolant temperature must be at least 123oF. If Idle When this feature is utilized, the timer will stop until the ignition key is used or the vehicle is driven. My only issue is with the, factory set, engine idle shutoff timer.

I have a brand new 06 Freightliner Columbia with a 470 CAT motor. Idle Shutdown Timer (IST): Limits the amount of engine idle time by automatically shutting down the engine after approximately 3 to 5 minutes. To do this, you can use the semi trucks’ clutch or brake anytime before the engine stops working. Truck Maintenance - Engine Idle Shut Off Timer - This seems like a great site.

Engine idle shutdown timer driver#

Verify Success, then Click OK be sure the ignition is turned off for 60 seconds for changes to take place. When the override feature is activated, a driver can stop the idle timer preventing the idle or engine shutdown. Click Set Value box and type in number of minutes from when Idle Shutdown should occur. Scroll down to Idle Shutdown Time Setting No. Typical fleet temperature limits were 75F as an upper limit and between -10F and 25F on the lower limit. 351 parameter.įrom Select Value column,click and select 1 to enable idle shutdown without park brake applied. These parameters can control the exact speed for idling the engine, set the idle timer length and establish the boundaries of when idling is allowed in both hot and cold temperatures. Scroll down to Idle Shutdown Active Without Parking Brake Applied No. 200 parameter. If this parameter is not set to 1 in the set value column, then from Select Value column, click and select 1 to enable idle shutdown VCS Changes must take place prior to changing Engine ECU selections. Verify Success of the written parameter, then Click OK be sure the ignition is turned off for 60 seconds for changes to take place. Once complete, turn ignition on and select engine in the upper left corner.